DLSS Frame Generation on Video
DLSS Frame Generation synthesizes intermediate video frames using optical flow and NVIDIA RTX acceleration, converting 24 FPS or 30 FPS clips into 60, 120, or higher FPS video.
Requirements
- Software: Visual Enhancer on 64-bit Windows 10 or Windows 11.
- GPU: NVIDIA RTX GPU (
compute capability >= 7.5; RTX 40 or RTX 50 series recommended). - Windows setting: Enable Hardware-Accelerated GPU Scheduling (
HAGS) in Windows Settings under System, Display, Graphics, Default graphics settings. - Resolution: Minimum
64 × 64 pxup to16,384 × 16,384 pxmaximum per side.
Step-by-step
Switch to Video mode and load your clip
Open Visual Enhancer, switch the Pipeline inspector to Video mode, and drag and drop one or more video files into the viewport or Batch Queue.
Enable DLSS Frame Generation
Scroll down the Video Pipeline rail and toggle DLSS Frame Generation on. Only one frame generator (DLSS Frame Generation, FSR Frame Generation, or Video Frame Generation) can be active per workflow.
Choose Target FPS or Multiplier
Select how the output frame rate should be calculated:
- Target FPS (
23.976up to480, such as60or120): Useful when targeting a fixed display refresh rate or normalizing mixed-FPS clips. Target FPS must exceed the incoming frame rate. - Multiplier (
2x–8x): Produces an exact integer cadence multiple (24 → 48 FPSat2x, or24 → 96 FPSat4x) with zero fractional timing adjustment.
- Target FPS (
Set Optical Flow Quality to High
Keep Optical Flow Quality on
Highfor final renders.Highsolves motion vectors on the finest grid so thin geometry, lateral camera pans, text, and semi-transparent smoke stay cohesive without tearing or halos. UseMediumorLowonly for faster draft previews.Preview on the timeline
Pick a Preview Length (
1 s–30 s) and click Preview. Covered frames are highlighted in green on the transport bar for Hold-to-Peek or 2-Up playback comparison against the original frame rate.Render and export
Click Render Video(s), choose your output path, container, and codec (including 10-bit HDR codecs such as
H.265 NVENCorAV1 NVENCif your source is HDR or RTX Video HDR is enabled), and start encoding.
Settings & ordering
- Upscale vs. Frame Generation order: Upscaling before DLSS Frame Generation feeds sharper edges to optical flow at higher VRAM cost. Running frame generation at
1080pbefore lightweight scaling lowers GPU load on4Kexports. - HDR support: DLSS Frame Generation supports HDR video when Preserve / Export 10-bit HDR is enabled with a 10-bit codec (
H.265 NVENC,AV1,VP9,ProRes, orFFV1). - Non-NVIDIA GPUs: On AMD or Intel DirectX 12 GPUs, use FSR Frame Generation in the same Video Pipeline rail instead.
| Control | Options | Default | Recommendation |
|---|---|---|---|
| Frame-rate mode | Target FPS / Multiplier | Target FPS | Target FPS for 60/120 Hz screens; Multiplier for exact 2x–8x |
| Target FPS | 23.976–480 | 60 | Use 60 or 120 FPS (must exceed source FPS) |
| Multiplier | 2x–8x | 2x | 2x for 30 → 60 FPS; 4x or 5x for 24 → 96 or 120 FPS |
| Optical Flow Quality | High, Medium, Low | High | Use High for clean edges and fast pans |
Generate higher frame rates in Visual Enhancer
Available for Windows 10 & 11 to run DLSS Frame Generation locally on your RTX GPU.
更多指南
Apply DLSS 5 Neural Rendering to images and videos, including intensity, multi-pass refinement, masks, and optical flow.
Colorize and grade images and videos using 12-slider adjustments, Reference Image matching, .cube 3D LUTs, and Auto Fixed Frames.
Sharpen images without halos using AMD CAS and NVIDIA NIS, choose appropriate sharpness levels, and order sharpening in your pipeline.